小弟參照CH372外置固件模式,程序參照CH372EVT\PUB\XFIRM\C,燒入單片機運行后,計算機說USB設備運行不正常,請教各位大俠時怎么回事
case DEF_USB_GET_DESCR: //獲得描述符 if(request.buffer[3]==1) //設備描述符上傳 VarSetupDescr=DevDes; else if(request.buffer[3]==2) //配置描述符上傳 VarSetupDescr=ConDes; else if(request.buffer[3]==3) { if ( request.buffer[2]== 0 ) VarSetupDescr=LangDes; else VarSetupDescr=SerDes; //做字符串處理 } mCh375DesUp();
如果要上傳接口描述符,端點描述符,該怎么改寫程序啊,請指教